Fire Prevention and Protection Presentation HSE Professionals

The fire occurred when three chemicals when three chemical mixed which are Oxegyn, Heat and Fuel. There are many components used to cool down.

1. Smoothing

2. Cooling

3. Isolite

There are many causes of spreading fire:

Convention: The transfer of heat through the air to combustible material like Paper oil or any Petroleum manufactured material when the huge amount of heat meet these components the fire may occur for these reasons.
Cooling: Mantian the are temperature where the ignition materials are stored.
Isolite: the area where the materials are stored

There are many Source of ignition some are:

1. Wood

2. Paper

3. Chemical

4. Petroleum related materials

5. Electrical Scrap

6. Welding fumes & sparks
7. Electrically heated cables
8. Etc

There are many types of equipment are used to Alarm you before Accident / Incident take place some are mentioned below:

1. Heat Detector

2. Smoke

3. Flame

Some types of equipment are also available to combat the fire caught any place, There are many types Extinguishers are developed by scientists to extinguish the fire. Some of the available for each type of fire Classification, some types are:

1. Hoses

2. Hydrants

3. Blankets

4. Nozzles

5. Sprinklers

6. Etc

Before the Fire fighting, you have to some basics knowledge of how to act when the Accident occurs.

1. You have to assure the size of the fire

2. Inform the worker and other staff at the workplace just like the shout Fire! Fire!Fire! activated the alarm.
3. Try to remove the combustible material from the Site

4. Try to restrict the size of Fire or ( if the size of the is uncontrollable leave the site and it is the best option inform the Government Rescue Agencies to help out)

5. Extinguish the Fire

It is important to point out that Excavation route should be cleared and all the staff should aware the Exits points are located, for this is necessary the HSE Professionals should conduct mock drills to aware Hazards and where the exits door are located. Some points should be considered during drills.

1. On hearing, the alarm leave the site and reach muster points

2. Do not enter the Accident Zone

3. Do not act if you have no Knowledge leave on the matter on HSE Professional they act than better then you.

There are many accidents occur in the history of the world if you want to know click on Wikipedia Link when reading this how the danger is a fire take the human lives.

There are many standards are developed to remain safe but one the World recognized body is NFPA if you want to read or access the material click on https://www.nfpa.org OSHA Standards https://www.osha.gov/SLTC/firesafety

If you want to Download Presentation the main Contents of the PPT are:

Introduction

Definitions

Mechanics of Fire

Spreading

Which Equipment used

Classifications

Source of Ignition

Excavation Procedures

Safe Practices

Safety Tips

If you want to download file click on the Names mentioned below.